1
Hi, Guest!

  LOKASI :  Surabaya

  AKTIVITAS :  25/01/2019

BAGIKAN :   

Bagikan :
Masukan Data Diri Anda
Nama harus diisi !
Email harus diisi !
Format email harus [email protected] !

Mesin Press Dan Bending HACO TSX

Update Terakhir
:
26 / 01 / 2018
Min. Pembelian
:
1 Biji
Harga
CALL
Bagikan
:
Kami CV. Abadi Baru menjual berbagai macam perlatan teknik

Perhatian !

Perusahaan ini terdaftar sebagai Free Member. Untuk menghindari hal-hal yang tidak diinginkan,harap berhati-hati ketika melakukan transaksi. Indonetwork tidak melakukan verifikasi alamat dan dokumen untuk keanggotaan Free Member. Kami tidak bertanggung jawab apabila terjadi hal-hal yang tidak diinginkan.

Detail Jual Mesin Press Dan Bending HACO TSX

Mesin press dan bending HACO TSX
The most budget friendly machines in our shearing line
Our TS guillotines are the most budget friendly machines in our shearing line. The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction. 

Guillotine shears have several advantages above swing-beam type shears. They are made to cut several material types and thicknesses.
All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator. 
Tampilkan Lebih Banyak
abadi baru mandiri
Jl.Raden Saleh No.49 , Surabaya
Indonesia 60171
Surabaya
25 / 01 / 2019

Detail Jual Mesin Press Dan Bending HACO TSX

Mesin press dan bending HACO TSX
The most budget friendly machines in our shearing line
Our TS guillotines are the most budget friendly machines in our shearing line. The TS machines are guillotine type shears. This means that the cutting action is a scissors cutting action. The hydraulic cylinders on the TS shears are positioned directly underneath the ram and pull the ram in a downwards direction. 

Guillotine shears have several advantages above swing-beam type shears. They are made to cut several material types and thicknesses.
All TS guillotines are standard fitted with the new SP9 control, conveniently located at the left hand side of the machine, within the immediate reach of the operator. 
Tampilkan Lebih Banyak